Veneer & core selection
Ply count, veneer species and grain direction are decided per model. No sheet enters the line before its moisture content is measured.
Production
Production
From veneer selection to packaging, the entire line runs in our own facility.
Cutting & glue spreading
Plies are cut to size and glue is spread at a fixed weight in cross directions, so the form holds evenly at every point.
3D hot pressing
Pressed in the model’s own mould under controlled heat and pressure. This is where the panel gets its character: the double-axis curve.
CNC trimming & edge profiling
Outline, hole positions and edge radius are machined in a single program — every part comes out identical to the last.
Sanding & surface preparation
The surface is opened with graduated sanding and the edge is checked by hand. Only then will paint or veneer hold properly.
Lacquer, veneer or upholstery
Depending on the chosen finish, multi-coat lacquer, natural veneer or fabric upholstery is applied; colour is compared to the reference card in every batch.
Inspection & packing
Dimensions, surface and colour are checked one last time; parts are interleaved with protection and palletised ready for container loading.
Send us your model, we’ll produce the sample
A technical drawing, a photo or a physical sample in your hand — whichever you have is enough. We agree the dimensions and finish together, then produce a sample.